 | | | | | | | | | | | | | |
| |
|
|  |
 | |
|  |
|
|
|  | | All our instruments are AU and VST 2.0 plug ins (Albino 3 and Organ 3 are also RTAS on Mac). To use our instruments you need 1. a Mac with at least Mac OSX 10.2.6 or a PC with at least Windows 98 (Windows XP recommended)
2. a compatible host software Compatibility means that two products are able to interact with each other. In our case this means that both, our instruments and the host software (sequencer) must match the AU or VST specification. Some points of this specification are not supported by all hosts, so please take a look at our comments below. |
|
|
|  | |
|
|  | |
| |
|
Sony ACID | What’s not working | An instrument is not detected by ACID (mainly after updating to new version) | Tips & Tricks | Acid is not scanning again properly after an install. Go to run on the start menu, type regedit, navigate to HKEY_CURRENT_USER\Software\Sony Media Software\ACID Pro\nnn\Metrics\VSTi Synth\ and delete the "plugs" entry. That will force acid to rescan all plugs/fx on the next startup. Doing so also helps if you uninstall a synth/effect yet it remains listed in acid. | | |
| |
|
Cubase SX / SL 2.x and 3.x | What’s not working | MIDI drag&drop is not supported by versions prior to 2.0. | Tips & Tricks | - | | |
| |
|
Digital Performer 4.1 and higher | What’s not working | - | Tips & Tricks | To use RM IV MIDI Files you need to drag/drop them to the right place in DP, see our example. | | |
| |
|
FL Studio 4 and up | What’s not working | FL Studio has its own method of assigning MIDI Controllers to parameters so you can’t use ECS (Easy Controller Setup). Generally MIDI-CC’s are a bit complicate to route to VST’s | Tips & Tricks |   Also the Pitch Bend range in the Channel Settings of Fruity must be 12 to not reduce the Pitch-Bend range settings of our instruments.
| |  To save all settings of our instruments the wrapper must be configured to “Allow program editing”.
|
| |
|
Garage Band | What’s not working | - | Tips & Tricks | - | | |
| |
|
Live 4.x | What’s not working | MIDI files cannot be dropped into Live, RM IV MIDI Beats cannot directly used. | Tips & Tricks | - | | |
| |
|
Logic 7.x | What’s not working | - | Tips & Tricks | - | Remark | all our instruments successfully pass Logic 7 AU validation |
| |
|
Orion | What’s not working | FL Studio has its own method of assigning MIDI Controllers to parameters so you can’t use ECS (Easy Controller Setup). Generally MIDI-CC’s are a bit complicate to route to VST’s.
MIDI drag/drop is not supported by Orion so RM IV MIDI grooves cannot be used directly. | Tips & Tricks | To use ECS Orion has to be set to use MIDI-CC as Automation: In the instruments window click on Opt->Config -> Automation-Type->MIDI-CC. | | Make sure Options/OutputDeviceSettings/EngineSettings/AlwaysRunning is checked so that the pads of RM III, RM IV and the keyboard of CronoX and daOrgan is working. |
| |
|
Sonar 3.x and higher | What’s not working | - | Tips & Tricks | With any problem we recommend to rescan using the VST wrapper and select “reset all” option before scanning as it seems there are several occasion that confuse the wrapper that can be fixed that easy. | | |
| |
|
Tracktion 2.x and higher | What’s not working | - | Tips & Tricks | - | | |
| |
|
 |
|  | |